 |
 |
 |
 |
 |
Our Table Top spray booth is the small, convenient version of our
other open faced spray booths. Since it fits nearly anywhere, all you have to do is plug it in
and you're ready to spray. No Ducting Required!
Download Brochure
Get A Quick Quote
Please fill out the information below and you will be contacted by us to give you a quick quote on the products of interest.
How it works
This unit is a self-contained tabletop spray booth. The unit features a three (3)-stage
filtration system that uses carbon as the final stage. This carbon filter absorbs organic
solvents so that the unit can be used indoors with no outside ventilation required.
Air is pulled into the face of the spray booth at a velocity of 125 linear feet per minute. It is first drawn over the object being sprayed to carry off any overspray. The overspray is captured in a net of fiberglass filters inside the booth. From there the air goes to a double layer of high-efficiency pleated filters to remove any remaining particles, then it is forced through two (2) beds of carbon granules to remove the solvent.
The spray booth is a 42" cube or 84" double wide constructed of robotically punched 18-gauge sheet metal panels, with an exhaust fan attached to the rear.
20" x 20" Paint Arresting Filters
24" x 24" Pleated Filters
24" x 24" HoneycombCarbon Filters
These filters are easily replaced and substantially reduce VOCs.
Manometer
The manometer indicates your filter condition and lets you know when it's time for filter
maintenance. Our manometers include all mounting hardware, 3/4 oz. bottle of indicating fluid,
red and green pointer flags, 8' of double column tubing, and instructions.
Floor Stand
Our floor stands are constructed from 10 gauge precision punched and formed steel. Accuracy
is insured by Computer Aided Manufacturing (CAM) control of the fabrication process.
Strategically Located Light Fixtures
Years of experience have gone into the design and placement of our light fixtures.
These units are designed and built by Spray-Tech for the express purpose of spray booth
lighting.
They feature mirrored reflectors for maximum light projection and a one piece outer skin to keep shop dust out, and give the spray booth a clean exterior look.
18 Gauge Steel Panels
Our 18 gauge steel panels are precision punched and formed. Accuracy is insured by
Computer Aided Manufacturing (CAM) control of the fabrication process.
All panels are galvanized for corrosion protection. Heavy duty white powder coating is available.
Some of our satisfied Table Top Booth customers include...
|
|
|
...and hundreds more ! ! !