Clean air is pulled through the intake filters at the top of the booth and flows downward to where it exits through the exhaust plenum at the bottom opposite end of the booth.

Turbine Exhaust
Quiet operation is assured with our reverse inclined turbine blade. It is made of non sparking materials and is self cleaning for maintenance free operation. The blower can be wired for 115, 208, or 230 volt operation. The exhaust is connected to an interior vapor removal plenum.

Strategically Located Light Fixtures
Years of experience have gone into the design and placement of our light fixtures. These units are designed and built by Spray-Tech for the express purpose of spray booth lighting.

They feature mirrored reflectors for maximum light projection and a one piece outer skin to keep shop dust out, and give the spray booth a clean exterior look.

20" x 20" Intake Filters
With two filters mounted high and a cattycornered low mounted exhaust, air in the mixing room remains vapor free for employee protection and safety.

Door Closer
The standard hydraulic door closer keeps the paint mixing area clean by keeping the door closed and dirt out.

Personnel Door
With ample window design the personnel door can be located on any sidewall in virtually any position and can hinge left or right.

Built In Spill Containment
Special floor channels create spill containment for code compliance. Pit based spill containment is also available.

18 Gauge Steel Panels
Our 18 gauge steel panels are precision punched and formed. Accuracy is insured by Computer Aided Manufacturing (CAM) control of the fabrication process.

All panels are galvanized for corrosion protection. Heavy duty white powder coating is available.